These are the settings that I am using to run my Dual Standard
modem under Windows 3.0 in 386 Enhanced mode with Binkley/Remote Access.

These settings are only meant to be a suggestion, from me, not from
Microsoft.

In order to run my BBS under Windows I also did the following:

Used BNU in the virtual machine instead of X00 globably.

Locked the area in memory (pif setting)
Increased the time slicing (at least double)
Used Com1 (Com2 works just fine too.)

ati4 with v42bis

USRobotics Courier 14400 HST Dual Standard Settings...

   B1  C1  E0  F1  M1  Q0  V1  X7
   BAUD=19200  PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &J0  &K3
   &L0  &M4  &N0  &P0  &R2  &S1  &X0  &Y0  

   S00=000   S01=000   S02=255   S03=013   
   S04=010   S05=008   S06=002   S07=050   
   S08=002   S09=006   S10=010   S11=050   
   S12=050   S13=000   S14=000   S15=008   
   S16=000   S17=001   S18=000   S19=005   
   S20=000   S21=010   S22=017   S23=019   
   S24=150   S25=000   S26=001   S27=000   
   S28=008   S38=000   

   LAST DIALED #: T882-1976

OK              
ati5 with V42bis
USRobotics Courier 14400 HST Dual Standard NRAM Settings...

   DIAL=TONE   B1  F1  M0  X7
   BAUD=19200  PARITY=N  WORDLEN=8

   &A3  &B1  &G0  &H1  &I0  &J0  &K3  &L0
   &M4  &N0  &P0  &R2  &S1  &X0  &Y0

   S02=255   S03=013   S04=010   S05=008
   S06=002   S07=050   S08=002   S09=006
   S10=010   S11=050   S12=050   S13=000
   S15=008   S19=005   S21=010   S22=017
   S23=019   S24=150   S26=001   S27=000
   S28=008   S38=000

   STORED PHONE #0: 
                #1: 
                #2: 
                #3: 

For more information, you can contact:
Sue Coleman
Crystal Cavern
1:343/105
206-883-1383